Camon SC45E, Руководство по эксплуатации

Страница: 15 / 36

SC45E Circular Saw
SC45E/05.14
Page 15
Technical Data
WARNING
The values given are the machine emission values, not the workplace safety values.
Although there is a relationship between the noise levels and the daily exposure level, it
cannot be stated with any certainty whether or not additional precautions are required.
Factors which may effect the daily exposure level at the workplace include the duration
of the activity, the characteristics of the workplace itself, other sources of noise, etc.,
for example the number of machines and other activities taking place in the vicinity.
7KH9DOXHVDGPLWWHGDWWKHZRUNSODFHPD\DOVRYDU\IURPFRXQWU\WRFRXQWU\7KHDERYH
obliges the user to carry out a better risk and hazard evaluation. (ref. Regulation EN
1870-6:2002)
Size of the log to be sawn
Figure 2 on page 4 shows the maximum diameter, the minimum diameter and the length of the
logs to be sawn.
'RQRWDWWHPSWWRFXWORJVZLWKDGLDPHWHURIOHVVWKDQWKHPLQLPXPVKRZQLQ¿JRQSDJHORJV
that are too thin may get stuck in the teeth of the blade, with possible risks to people and damage
to the machine itself.
Do not attempt to load logs that are longer than the measurements shown: this could jeopardize
the machine’s stability.
WARNING
Use adapted lifting equipment in order to load logs heavier than the level established
by the current regulations in order to protect the health and safety of the operator.
!
!