SC45E Circular Saw
SC45E/05.14
Page 13
Explanation of Symbols Used
Standard graphic symbols are used on all machines in order to ensure complete safety of all parts of
the Log Splitter. As these symbols are very important, read the information below carefully.
It is necessary to read carefully the entire
use and maintenance manual of the
machine, before using it.
It is obligatory to wear safety footwear at
all times to provide protection against the
risk of logs accidentally falling on feet.
It is obligatory at all times to wear gloves
which protect the hands against chips
and splinters which may be produced
during work.
It is obligatory at all times to wear
goggles which protects the eyes against
chips and splinters which may be
produced during work.
In normal conditions of use the saw
may expose the operator to daily noise
levels lower than or equal to 85 dB(A).
It is therefore obligatory to wear ear
defenders.
Warning: moving parts. Risk of serious
injury.
Warning: Before carrying out any
maintenance operation described in
this manual, disconnect the plug of the
machine.
It is forbidden to stand in the range of
action of the machine, apart from the
operator, no other person or animal may
be present within a radius of 5 metres
from the machine. The log splitter must
be used by one person alone.
The machine must be used by one
person alone.
Danger of cutting of the hand: never
touch hazardous areas while the blade is
moving.
Warning: voltage as indicated on the
rating plate.
Direction of rotatation of the motor.
If the motor runs in the wrong
direction, follow the instructions
given in chapter 4.3.
0DFKLQHV¿WWHGZLWKHOHFWULFDOSDUWVPXVW
not be disposed of as general waste
but must be separated for disposal and
deposited at authorised collection points.
It is forbidden to put hands in the area
around the rotating blade.
It is forbidden to carry out any
maintenance work or to renew parts on
the machine when it is running.
It is forbidden to remove or tamper
with the protection devices and safety
devices.
Hitch point.
Содержание SC45E
