EMC_SPEC018_C2.doc
Rev. D
–
2020 05 19
32/44
Install & Operating Manual
CamSafe
Step 3 : Insertion of the new filter (continued)
Please Note :
Damage-free insertion is
guaranteed for specified
Camfil filters with rails only.
Filters without rails will fit, but
safe manipulation is entirely
under the responsibility of the
user.
Push gently until hitting the stop.
The lever shape ensures that only
a fully inserted filter can be locked
Swing the locking lever 180°
all the way to the right
to lock
Pull on the plunger knob (opposite the lever) to unlock and start swinging, releasing the knob again.
Swing the lever all the way to its end position to safely lock the filter.
PLEASE NOTE :
You will not be able to place the housing door, if the lever is not in its LOCKED end position.
Place the door on the housing,
avoid scraping on the threaded
rods
Tighten the four knobs
progressively to ensure even
gasket compression
Once the knobs are locked,
the intervention is finished
PULL
first
