EMC_SPEC018_C2.doc
Rev. D
–
2020 05 19
29/44
Install & Operating Manual
CamSafe
Step 3 : Insertion of the new filter
Precautions :
Check the gasket sealing surface.
If necessary, clean with alcohol on a soft, lint-free cloth
Pick up the new filter
without touching the media
and insert carefully into the
housing
The gasket needs to be on the
top and the grips in the back &
front
Push gently
until hitting the stop
.
The lever shape ensures that only
a fully inserted filter can be locked.
Swing the locking lever 180°
all the way to the left
to lock
The door can only be placed if
the lever is in the locked end
position
Place the door on the housing,
avoid scraping on the threaded
rods
Put the fixing knobs back on
without locking them yet
Tighten the four knobs
progressively to ensure even
gasket compression
Once the knobs are locked,
the intervention is finished
