28
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
9
8
7
TOUCHES DE COMMANDE
MENU - Appuyer sur MENU pour accéder au menu de sélection des paramètres du système. Appuyer plusieurs fois sur la touche pour
revenir à l’écran principal.
ENTER - Permet de modifier une valeur et de confirmer les modifications de valeur.
Touches UP et DOWN - Sélection des différentes options du menu de sélection et des sous-menus (mode de fonctionnement, informations
sur le système, etc.). Modification d’une valeur, par ex. l’adresse DMX.
Pour accéder directement à l’option de menu ouverte en dernier, appuyer simultanément sur MENU et ENTER.
8
ZOOM
Bouton moleté pour régler la taille du faisceau lumineux (butée droite = taille minimale du faisceau lumineux, butée gauche = taille maxi-
male du faisceau lumineux).
9
ŒILLET DE SÉCURITÉ
Œillet de sécurité pour sécuriser le projecteur en cas de montage sur traverse.
MODE D’EMPLOI
REMARQUE :
Dès que le projecteur est correctement raccordé à l’alimentation secteur, diverses informations s’affichent successivement à l’écran durant
la phase de démarrage : « Update Wait... » (uniquement à des fins de maintenance), « WELCOME TO Cameo », la référence du modèle et
la version du logiciel. À l’issue de cette phase, le projecteur est opérationnel et le mode de fonctionnement précédemment sélectionné est
activé.
ÉCRAN PRINCIPAL DU MODE DMX
La mention « DMX Addr » s’affiche dans la ligne supérieure de l’écran, tandis que la ligne inférieure indique l’adresse de départ DMX
actuellement paramétrée. Si le
signal DMX est interrompu, l’écran se met à clignoter, puis cesse de clignoter dès que le signal DMX est de nouveau reçu. Si aucune saisie
n’est effectuée dans les 30 secondes environ, l’affichage retourne à l’écran principal.