7
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
CONFIGURING DMX MODE
You can access the options menu by pressing MENU. Using the UP and DOWN buttons, now select the “DMX Addr” menu item (bottom row)
and confirm via ENTER. You can now set the DMX start address as desired using UP and DOWN (hold down to quickly change values, highest
value depends on the activated DMX mode). Confirm your input via ENTER and press MENU once to return to the main screen. If there is no
input within approx. 30 seconds, the main screen is automatically activated. If the main screen is activated, it is possible to change the DMX
start address directly (UP and DOWN buttons).
CONFIGURING DMX MODE
You can access the options menu by pressing MENU. Using the UP and DOWN buttons, now select the “Mode” menu item (bottom row) and
confirm via ENTER. Using the UP and DOWN buttons again, select the “DMX” menu item and confirm via ENTER. You can now select the
desired DMX mode using UP and DOWN and then press ENTER to confirm your selection. Press MENU again to return to the main screen.
If there is no input within approx. 30 seconds, the main screen is automatically activated. You can find tables on channel assignment in the
different DMX modes in these instructions under DMX CONTROL.
SLAVE MODE
You can access the options menu by pressing MENU. Using the UP and DOWN buttons, now select the “Mode” menu item (bottom row) and
confirm via ENTER. Using the UP and DOWN buttons again, select the “Slave” menu item and confirm via ENTER. Connect the slave and
master unit (same model, same software version) using a DMX cable, and activate one of the stand-alone modes (Auto, Macro, HSI, CCT,
Direct) on the master unit. The slave unit will now follow the master unit. Press MENU again to return to the main screen. If there is no input
within approx. 30 seconds, the main screen is automatically activated.
STAND-ALONE MODE AUTOMATIC CONTROL (Auto)
Stand-alone mode for selecting an auto program (Program) and for setting the brightness (Dimmer) and speed (Speed). You can access the
options menu by pressing MENU. Using the UP and DOWN buttons, now select the “Mode” menu item (bottom row) and confirm via ENTER.
Afterwards, select the “Auto” menu item by using the UP and DOWN buttons again. Confirm with ENTER. Now use UP and DOWN to select
the submenu item you’d like to edit and then press ENTER. Set the desired value by pressing UP and DOWN (hold down to quickly change
values) and confirm via ENTER. Press MENU again to return to the main screen. If there is no input within approx. 30 seconds, the main
screen is automatically activated. If the main screen is activated, the overall brightness (dimmer) can now be set directly (UP and DOWN
buttons).
Six different audio programs are available:
Auto program
7ColJum
=
7 color jumping
7ColFad
=
7 color fading
15ColJum
=
15 color jumping
15ColFad
=
15 color fading
RandJump
=
Random jumping
RandFade
=
Random fading
