Installation and operating instructions
of portable LED spotlight
General information
Please read and follow these instructions carefully to ensure safe and
reliable operation. Keep this instruction in a safe place for future
reference to be able to answer your questions.
Attention:
In case of damage or consequential damage caused by non-
observance of these instructions, the warranty claim becomes void.
Performance features of the portable spotlight
white LED as illuminant, emergency light function, 3 brightness levels
and flashing function
Areas of application
Robust, reliable work lamp for all situations.
Whether in leisure time, camping and hunting or as a companion at
work, this super-bright signal light always provides the optimum light.
The maintenance-free lead battery allows a light duration depending on
the performance level up to 18h. The charging can be done either with
the included plug-in power supply or the 12V adapter. Due to the
flashing function, this light can be used as a warning light.
Components
1 Lamp head
2 Carrying handle
3 hinge
4 Operating mode switch
5 Charging socket
6 Battery level indicator
7 Charging contacts for wall bracket
8 Wall bracket
8a Charging connector
8b Retaining pins
8c Charging socket from wall bracket
Emergency lighting function
In the event of a power failure, the work lamp switches on automatically.
Proceed as follows:
1. Turn on the work lamp
2. Set desired function/brightness
3. Connect charger to wall bracket or directly to signal lamp
4. Connect charger to 230V socket - the lamp turns off
Simulation emergency light function
Disconnect the charger from the 230V socket - the signal lamp switches
on automatically.
Electronic deep discharge protection
This work lamp is equipped with an electronic deep discharge protection
in order to protect the rechargeable battery. This extends the lifetime of
the battery and protects the environment.
Important safety notice
The operation under adverse environmental conditions must be avoided
under all circumstances. Adverse environmental conditions are: Ambient
temperatures above 50°C, flammable gases, solution medium, vapours
and dust.
If it can be assumed that safe operation is no longer possible, the device
must be taken out of operation immediately and secured against
unintentional operation. Safe operation can no longer be assumed if the
device no longer functions properly, shows visible damage, if it is
damaged in transit, or if it is stored under unfavorable conditions.
Service and repair work may only be carried out by authorized specialist
personnel.
Important note / tips for a long battery life!
Before initial use please charge for approx. 24 hours.
Lead-gel batteries achieve their longest life if they are stored in full
condition. Reconnect the signal lamp to the charger after use. The signal
lamp can remain permanently connected to the charger. The electronic
charging circuit ensures optimum charging conditions. This prevents the
battery from being overcharged. The lead-gel battery of the signal lamp
can be charged approx. 300 - 400 times. Replace the battery only with
the same type, voltage and capacity.
Note on environmental protection
This product must not be disposed of with normal household waste at
the end of its life, but must be taken to a collection point for the recycling
of electrical and electronic equipment. The symbol on the product,
instruction manual or packaging indicates this.
The materials are recyclable according to their marking. By reusing,
recycling or other forms of recycling old equipment, you make an
important contribution to protecting our environment. Please contact the
local administration the responsible disposal point.
Warranty
Our products are guaranteed for 2 years.
This guarantee only comes into effect if the lamp has remained
unchanged and has been connected and used in accordance with the
operating instructions.
Battery and LED are wear parts. We grant a one-year guarantee on the
battery if it can be proven that it has been used within the specified
temperature range.
The following information is given solely for the purpose of this manual
and does not constitute a contractual commitment:
The quality of the batteries ensures that a service life of more than four
years can be expected in accordance with the DIN/EN 60598-2-22
standard if the specified temperatures are maintained.
The green LED "3" lights up permanently when the battery is full.
Technical data
Illuminant
LED 3W
Colour temperature
5300K
Performance level 1 / duration
approx 1W / 120lm / 10h
Performance level 2 / duration
approx 0,75W / 90lm / 14h
Performance level 3 / duration
approx 0,6W / 70lm / 18h
Connected load AC
max. 9,1VA
Connected load standby AC
max. 1,6VA
Rechargeable battery
OGIV 6V / 4,5Ah
Deep discharge protection
4,8V
Degree of protection
IP43
Protection class
III
Temperature range
+5°C bis 40°C
Dimensions (H x W x D)
290 x 125 x 150 mm
Weight
1580 g (without charging station)
