CAME ZLJ14, Руководство по установке

Страница: 41 / 96

p.
17
- M
an
ua
l
FA
010
82
-E
N
- 0
2/
20
18 - © C
AM
E S
.p
.A
. - T
ra
ns
la
tio
n o
f t
he o
rig
in
al i
ns
tru
ct
io
ns
Menu 1st level Menu 2nd level Options Default
Setting the slow-down starting point before the closing limit-switch, calculated as
a percentage of the complete gate swing.
&
This function only appears if the [Enc. Slodwn.] function in the [ENCODER]
menu
.
[CL. Sftstp. %] [1%]
……
[15%] [15%]
Setting the latch-speed starting point before the opening limit-switch, calculated
as a percentage of the complete gate swing.
[OP. Sftstp.%]
[1%]
……
[15%]
[15%]
Setting the starting latch-speed point before the opening limit-switch, calculated
as a percentage of the complete gate swing.
[Calibrate Gate-
Swing]
[Confirm? (no)] / [Confirm? (yes)] [Confirm? (no)]
Automatic calibration of the gate-leaf swing (see the CALIBRATING SWING
paragraph).
[SET TIMES]
[A.C.T]
[0 s]
……
[300 s]
[10 s]
Waiting time before the automatic closing, once the opening limit-switch point is
reached. The automatic closing does not work if any of the safety devices trigger
when an obstruction is detected, or after a total stop, or during a power outage.
[Partial A.C.T.]
[0 s]
……
[300 s]
[10 s]
Like the [ACT], applied to the partial opening.
[Working Time]
function
[10 s]
……
[150 s] [90 s]
Gearmotor working time during opening and closing.
[Preflash T]
[1 s]
……
[60 s]
[5 s]
After an opening or closing command, before starting the maneuver the flashing
light connected to W-E flashes for the set time.
[Lock time] [1 s]
……
[5 s] [2 s]
Intervention time for the electrolock to release after each opening command.
[Jolt time]
[1 s]
……
[3 s]
[1 s]
The closing and opening jolt thrust-time of the geartmotors after each command.
[Part.open] [5 s]
……
[60 s] [10 s]
The time required to define the wanted partial-opening space.
[Court. Time]
[60 s]
……
[300 s]
[300 s]
For setting the lighting up time of the courtesy light connected to 10_E3.
[USERS]
[New User]
Entering up to 250 users and associating to each one a function of choice among
those included. Enter by using a transmitter or other control device (see the
ENTERING A NEW USER paragraph).
[Edit. name]
For changing a user's number or name
[Edit Code]
To modify the command code that is associated to a user.