Page
15
- Manual
- FA01940-EN
- 02/2023 © CAME S.p.A.
Passage-open warning light
F10
Barrier status warning.
0 = Warning light on (default) - The light stays on when the boom is moving or open.
1 = Warning light fl ashing - The warning light fl ashes every half a second when the boom
is opening and remains on when the boom is open. The light fl ashes every second when
the boom is closing, and remains off when the boom is closed.
Flashing rope light
F15
Choose how you would like the barrier status to be signalled using the rope light fl ash
settings.
1 = The rope light fl ashes when the boom is moving and when closed.
0 = The rope light fl ashes when the boom is moving (Default).
Light E1
F18
Choose the operating mode for the lighting device connected to output E1.
0 =Flashing beacon (Default)
1 = Cycle light - The lamp stays on during the manoeuvre.
This parameter does not appear if the [F19 - Automatic Close] function is
deactivated.
2 = Courtesy lamp - The light switches on when a manoeuvre starts and remains on once
the manoeuvre has fi nished, for the time set under the function [F25 Courtesy time].
Automatic closure
F19
Set the time before automatic closure, once the opening travel end point has been
reached.
The function does not work if any of the safety devices are triggered when an
obstacle is detected, after a complete stop, during a power outage or if there is an
error.
0 =Deactivated (Default)
From 1 to 180 seconds
Pre-fl ashing time
F21
Adjust the time for which the beacon is activated before each manoeuvre.
0 =Deactivated (Default)
1 to 10 seconds
Operating time
F22
Set the gearmotor working time during opening and closing.
5 to 120 seconds (Default 120 seconds)