p.
13
- Manual
FA01354-EN
- 07/2019 - © C
AME S.p.A. - The cont
ents of this manual may change, at any time, and without notice. - Original instructions
Establishing the travel end points with mechanical limit-switches
Check that the boom is parallel to the road surface when it is in the closed position and at about 89° when it is in the open position.
Correct the boom's horizontal position
Release the gearmotor
Open the inspection hatch.
1
Turn the mechanical stop until the desired position of the boom is achieved.
2
Fasten the mechanical stop with a counter nut.
Lock the gearmotor
~1°
~89°
+
-
❶
❷
+
-
Correct the boom's vertical position
Release the gearmotor
Open the inspection hatch.
1
Turn the mechanical stop until the desired position of the boom is achieved.
2
Fasten the mechanical stop with a counter nut.
Lock the gearmotor
~1°
~89°
+
-
❶
❷
-
+
