background image

Page 

5

 - Manual 

FA01561-EN

  - 02/2023 - © C

AME S.p.A. - The contents of this manual may be changed at any time and without notice. - T

ranslation of the o

riginal instructions

PRODUCT DATA AND INFORMATION

Key

 This symbol shows which parts to read carefully.

 This symbol shows which parts describe safety issues.

 This symbol shows what to tell users.

 The measurements, unless otherwise stated, are in millimetres.

Description

801MP-0070

ATS30DGS - Irreversible telescopic gearmotor 24 V with encoder for swing gates with Max. C up to 200 mm with leaf up to 3 m and 400 kg. Grey RAL7024.

801MP-0080

ATS50DGS - Irreversible telescopic gearmotor 24 V with encoder for swing gates with Max. C up to 200 mm with leaf up to 5 m and 400 kg. Grey RAL7024.

801MP-0110

ATS30DGR - Irreversible telescopic gearmotor 24 V with encoder for swing gates with max. C 200 mm, with remote release, with leaf up to 3 m and 400 kg. Grey RAL7024.

801MP-0130

ATS30DGM - Irreversible telescopic gearmotor 24 V with encoder for swing gates with C max. 200 mm with leaf up to 3 m and 400 kg, for applications also at low 
temperatures. Grey RAL7024.

801MP-0140

ATS50DGM - Irreversible telescopic gearmotor 24 V with encoder for swing gates with C max. 200 mm with leaf up to 5 m and 400 kg, for applications also at low 
temperatures. Grey RAL7024.

Intended use

Solutions for applications in residential buildings and apartment blocks

 Any installation and/or use other than that specified in this manual is forbidden.

Содержание ATS50DGM





















Отзывы: