background image

TITLE

general

 conditions

1.   SUBJECT
1.1 
 These general conditions (the “General Conditions”) govern the terms 

of licensing and use of the software (the “Software”), required to use 

the system called CameConnect (“CameConnect” or the “Service”), 

which includes (i) the web interface via the website www.cameconnect.

net site (the “Website”); (ii) the application for smartphones (the “App”); 

(iii) fi rmware and software; (iv) hardware devices (the “Hardware”).

1.2  The Service is intended solely for users operating for purposes not 

related to their entrepreneurial, commercial, artisanal or professional 

activities (the “Users”).

1.3  In order to access the Service, the User, upon activation of the Service 

itself, must fi ll in a form present on the Website, in which he/she 

will have to provide some personal data (the “Form”). The General 

Conditions, together with the Form, are a contract between the User 

and Came S.p.A. (the “Contract” and “Came”, respectively).

1.4  In order to fi ll in the Form, the User must also open an account on the 

Website, if he/she has not done so already, creating an ID and relative 

password. 

 

Except in the event that a third party violates the Came computer 

systems, the User shall be exclusively responsible for maintaining the 

confi dentiality of his/her account information, including the password, 

and any activities originating from the account itself. In the event of 

unauthorised use of the account, the User shall give immediate written 

notice to Came so that the account itself can be blocked.

1.5  By accepting the General Conditions, the User declares that he/she 

is aged over eighteen and is in possession of all the requirements 

necessary to accept the terms contained herein and recognises the 

compulsory nature of said terms.

2.   SOFTWARE LICENCE
2.1
  The Software is the exclusive property of Came.
2.2  By entering into the Contract, Came grants the User a non-exclusive, 

revocable, limited, personal and non-transferable licence for 

the Software for an indefi nite period, which may only be used in 

accordance with the terms of the Contract.

2.3  The User shall be exclusively responsible for the use of the Software 

and, to that end, undertakes not to use it with any application other 

than CameConnect and/or in relation to products other than those from 

the Came Group.

2.4  The User remains responsible for ensuring he/she has the tools and 

technical accessories necessary to support the use of the Software.

2.5  Came remains the exclusive owner of all rights concerning the 

Software and CameConnect, including trademarks, patents and 

confi dential information related thereto. Consequently, under the 

Contract, the User does not acquire any right, title or interest in respect 

of any intellectual property rights, copyright or other proprietary rights, 

including patents, designs, trademarks, copyright, database rights, 

commercial or confi dential information or secrets proprietary to or 

available to Came.

2.6  The User recognises that the Software, and related documentation, are 

licensed exclusively to the User and that the use of the Software must 

be in accordance with applicable laws, in particular those concerning 

the protection of copyright and/or other industrial or intellectual 

property rights. 

 

Consequently, the User is prohibited from:

 

copying (except for backup), transferring, reselling, sublicensing and/or 

marketing the Software in any form, in whole or in part;

 

modifying, decompiling, disassembling and/or performing reverse 

engineering on the Software;

 

using the Software for purposes other than the operation of 

CameConnect;

 

removing any reference to Came’s proprietary rights relating to the 

Software and CameConnect.

3.   THE SERVICE
3.1
  The Service has the characteristics described in detail in the User 

Manuals.

3.2  Each subscription to the Service is governed by the General 

Conditions, in the version published on the Website at the time the 

Form is submitted.

3.3  The prices and characteristics of the Service are subject to change 

without notice. Before fi lling in the Form, the User must verify the 

aforementioned information and, in particular, the indicated amount.

3.4  The User acknowledges that:
 

it is necessary to download and install the Software in order to use the 

Service;

 

correct use of the Software requires the possession of an automation, 

home automation, security, temperature control and/or video 

surveillance system manufactured by Came, which has been enabled 

for remote management.

3.5  Any costs for connection via internet, including telephone costs, 

according to the rates applied by the operator chosen by the User 

himself/herself, are the sole responsibility of the User. The User also 

hereby declares that he/she is aware of the fact that the Hardware 

must be equipped with a SIM card that permits internet access, with 

costs borne solely by the User himself/herself. The estimated data 

consumption for average use is less than around 1 GB/month for each 

automation, it being understood that actual traffi c depends on actual 

usage.

3.6  The Service can only by purchased by users residing in once of the 

countries listed on the Website.

4.   CONCLUSION OF THE CONTRACT
4.1
  In order to purchase the Service and sign up for the related 

subscriptions, the User must fi rst register on the Website and submit 

the Form.

4.2  The publication of the Service on the Website represents the invitation 

to the User to submit a contractual offer, which will be submitted by 

fi lling in the Form. Came reserves the right to accept or reject said 

offer.

4.3  The Contract will be considered concluded at the moment in which the 

Service is activated or in which the activation confi rmation e-mail is 

sent to the User at the e-mail address indicated on the form, whichever 

comes fi rst.

4.4  In the event that Came encounters any inaccuracy in the fee and/

or characteristics of the Service published on the Website, it will give 

explicit written notice to the User, who will be free to formulate a new 

offer.

5.   FEE AND PAYMENT
5.1  
Where applicable, the fee for the Service indicated on the Website (the 

“Fee”) is expressed in Euros.

5.2  Unless otherwise specifi ed, the Fee is inclusive of VAT and any indirect 

taxes, if applicable.

5.3  The User shall pay the sum indicated on the Form to Came, according 

to the deadlines set out therein.

5.4  Upon completion of the Form, where a Fee is required, the User will 

automatically be directed to the website of the subject responsible 

for the management of online payments. Came reserves the right to 

verify the identity of the holder of the credit card by requiring proper 

documentation.

5.5  The provision of the Service will only start when the payment of the 

Fee has been correctly received by Came. If Came does not receive 

payment within 10 working days from the due date, Came may 

immediately suspend the Service and terminate the Contract by giving 

written notice to the User.

6. RIGHT OF WITHDRAWAL
6.1
  The User is entitled to withdraw from the Contract concluded under the 

General Conditions, without penalty, within 14 days of its conclusion.

6.2  To exercise the right of withdrawal, the User must inform Came, before 

the expiry of the period referred to in art. 6.1 above, by completing this 

sample withdrawal form, or by sending an explicit declaration of his/her 

decision to withdraw. 

 

Came will promptly send the User an e-mail confi rming receipt of the 

request for withdrawal.

6.3  In the event of a legitimate and proper exercise of the right of 

withdrawal, the   User will be reimbursed any sums already paid to 

Came, within 14 days of receiving the notice of withdrawal, using - 

unless otherwise indicated by the User - the same means of payment 

used by the latter. 

 

If, at the time of the declaration, the provision of the Service has 

already begun at the express request of the User, Came will be entitled 

to retain reasonable fees for the use of the Service, in proportion to the 

period of use thereof.

7. DURATION OF THE SERVICE
7.1
  The subscription to the Service is indefi nite. The User may withdraw 

from the Contract at any time without penalty or reimbursement, on 

the condition that the withdrawal will be effective from the last day 

of the month in which the notice of withdrawal is received by Came. 

The User may exercise the right of withdrawal by completing this 

sample withdrawal form, or by sending an explicit declaration of his/her 

decision to withdraw.

7.2  Came may in turn withdraw from the Contract at any time without 

reimbursement or compensation being due, on the condition that the 

withdrawal will be effective from the last day of the month in which the 

User receives notice of withdrawal from Came.

Содержание ATS-S324





























Отзывы: