background image

TITLE

terms of 

use

1.   SUBJECT
1.1  
These terms of use (the “Terms of Use”) govern the terms and 

conditions under which Came S.p.A. (“Came”) licenses the installation 

technicians in its network (the “Installers”) to use the software 

necessary to access and supply end customers with certain services 

related to the system called CameConnect (the “Software” and 

“CameConnect” respectively), which includes (i) the web interface via 

the website www.cameconnect.net (the “Website”); (ii) the smartphone 

application (the “App”); (iii) fi rmware and software; (iv) hardware 

devices (the “Hardware”).

1.2  The owner of the Software, the Website and CameConnect is Came.
1.3  In order to download the Software and access CameConnect, the 

Installer must fi ll in a form on the Website, in which he/she will have to 

provide some personal data (the “Form”).

 

In order to fi ll in the Form, the Installer must also register on the 

Website, if he/ 

she has not done so already, opening an account, 

creating an ID and relative password. Except in the event that a 

third party violates the Came computer systems, the Installer shall 

be exclusively responsible for maintaining the confi dentiality of his/

her account information, including the password, and any activities 

originating from the account itself. In the event of unauthorised use of 

the account, the Installer shall give immediate written notice to Came 

so that the account itself can be blocked.

1.4  By accepting the Terms of Use, the Installer declares that he/she is 

in possession of all the requirements necessary to accept the terms 

contained herein and recognises the compulsory nature of said terms.

2.   LICENSING AND INTELLECTUAL PROPERTY RIGHTS
2.1  
Came grants the Installer a non-exclusive, revocable, limited, personal 

and non-transferable licence for the Software for an indefi nite period, 

which may only be used in accordance with the Terms of Use.

2.2  The Installer shall be exclusively responsible for the use of the 

Software and, to that end, undertakes not to use it with any application 

other than CameConnect and/or in relation to products other than 

those from the Came Group.

2.3  The Installer remains responsible for ensuring he/she has the tools and 

technical accessories necessary to support the use of the Software. 

The minimum system requirements required at that particular time are 

indicated on the following webpage.

2.4  Came remains the exclusive owner of all rights concerning the 

Software and CameConnect, including trademarks, patents and 

confi dential information related thereto. Consequently, the Installer 

does not acquire any right, title or interest in respect of any intellectual 

property rights, copyright or other proprietary rights, including patents, 

designs, trademarks, copyright, database rights, commercial or 

confi dential information or secrets proprietary to or available to Came.

2.5  The Installer recognises that the Software, and related documentation, 

are licensed exclusively to the Installer and that the use of the 

Software must be in accordance with applicable laws, in particular 

those concerning the protection of copyright and/or other industrial or 

intellectual property rights.

 

Consequently, the Installer is prohibited from:

 

copying (except for backup), transferring, reselling, sublicensing and/or 

marketing the Software in any form, in whole or in part;

 

modifying, decompiling, disassembling and/or performing reverse 

engineering on the Software;

 

using the Software for purposes other than the operation of 

CameConnect;

 

removing any reference to Came’s proprietary rights relating to the 

Software and CameConnect.

3.   CAMECONNECT
3.1
  CameConnect has the features described in detail in the User Manual.
3.2  The features of the Software and CameConnect are subject to change 

without notice.

4.   DURATION OF THE LICENCE
 

The licence shall be deemed granted indefi nitely. Either party may 

withdraw at any time without penalty or compensation.

5.   EXPRESS TERMINATION CLAUSE
 

Came reserves the right to terminate this licence agreement with 

immediate effect in the event of the violation of the terms of Articles 

2.2 and/or 2.5. In this case, termination shall occur automatically 

upon receipt by the Installer of the notifi cation sent by Came, with no 

obligation for prior notice, without prejudice to the right of Came to 

claim compensation for any damage suffered.

6.   PROVISION OF THE SERVICE. LIMITATION OF LIABILITY
6.1
  Came undertakes to ensure the ongoing provision of CameConnect 

and the contents of the Website.

6.2  Came will do everything in its power to schedule maintenance of the 

systems so as to ensure the ongoing nature of the provision. In the 

event of extraordinary and/or unscheduled maintenance, Came shall 

take all reasonable measures to reduce the inconvenience to the 

Installer.

6.3  In the event that any service defi ciencies are due to causes not 

attributable to Came, including, but not limited to, unforeseeable 

circumstances, force majeure, technical problems related to third-party 

internet, software or hardware, interference and/or specifi c weather 

conditions, Came will not be in any way liable for the failed or faulty 

provision of the service, nor will it be liable for any loss, damage or 

injury arising from these to the Installer.

7.   INSTALLER DATA AND PRIVACY
7.1
  Registering on the Website implies the transfer by the Installer 

of certain personal data. To this end, the Installer undertakes to 

communicate correct, current and truthful data.

7.2  The Installer’s personal data will be processed by Came as detailed in 

its privacy policy.

7.3  With the prior express consent of end customers, Came may inform 

the Installer of the data strictly necessary for the provision of remote 

assistance services related to CameConnect. In particular, with the 

express consent of the end user, the Installer that performed the 

installation of the automation, home automation, security, temperature 

control and/or video surveillance system manufactured by Came may 

be associated with the system itself. In this way, the Installer can 

perform remote diagnostics, also verifying the number of operations 

performed, the status of the photocells and the Hardware parameters, 

and proceed with remote assistance to help the end customer.

 

For the above purposes, pursuant to Italian Legislative Decree 

196/2003, by fi lling in the form and/or registering on the Website, the 

Installer is appointed as external data processor. The Installer therefore 

undertakes to comply with the applicable laws regarding privacy, doing 

whatever is necessary to ensure the confi dentiality and protection of 

data disclosed by Came, and putting in place all necessary technical 

measures. The Installer shall hold harmless and indemnify Came from 

any liability that may arise to the latter in violation of this article.

 

The Installer may use the data disclosed by Came exclusively for the 

provision of the remote assistance services related to CameConnect; 

any other use of the same is forbidden, as is its provision, sale and/or 

transfer to third parties.

 

In any case of termination of the licence, the Installer undertakes to 

delete the data immediately, and in any case within 5 days from the 

termination itself, providing immediate written confi rmation to Came.

8. GENERAL PROVISIONS
8.1
  Any communication from the Installer that is connected and/or related 

to the relationship with Came - including any complaints, reports, 

requests, exercising of the right of withdrawal etc. - must be sent to 

the e-mail address [email protected] or, by registered 

mail with acknowledgement of receipt, to the following address:

 

Came S.p.A.

 

Via Martiri della Libertà 15,

 

31030 Dosson di Casier

 

Treviso - Italia

 

Any communication to the Installer will be sent by registered mail with 

acknowledgment of receipt or by e-mail to the addresses indicated on 

the form.

8.2  Any dispute arising from these Terms of Use or related thereto will be 

under the exclusive jurisdiction of the Court of Treviso (Italy).

8.3  Came reserves the right to make changes to the Terms of Use at any 

time, publicising them on this page. In the event of a failure to accept 

the changes made to the Terms of Use, the Installer may withdraw 

under the terms of article 4.

Содержание ATS-S324





























Отзывы: