background image

TITLE

7

 pre-installed

 sim card

The pre-installed SIM card is an IOT/M2M multi SIM complete with 480MB data allowance and 3 year life term. 
Under average usage of 3-4 gate manoeuvres per day, the data should last approximately 3 years.
In case you use up the 480MB data volume before the end of the 3-year term, you can easily add another 480MB data 
volume by making a top-up, details of which can be found here:

www.cameconnect.co.uk/gsmmodule

Due to situations outside of our control, CAME cannot guarantee signal strength or availability and therefore will not be 
held liable for lack of service.

came 

automation

internet

came 

cloud

setup app

for the installer

GET IT ON

App Store

GET IT ON

automation app

for the end user

GET IT ON

App Store

GET IT ON

System Frequency

Approx. Movements

Est. SIM Life Based on Usage

Occasional Usage

Approx. 5 gate manoeuvres per 

week

4-7 Years*

Average Usage**

Approx. 3-4 gate manoeuvres 

per day

3-4 Years

High Usage

Approx. 5+ gate manoeuvres per 

day, multiple scenarios running

1-3 Years

* SIM will expire after 3-4 years. (CAME guarantees 3 years with some tolerance for shelf life consideration)  

** We anticipate SIM provided will have suffi cient data for Average Usage (as shown above) lasting approx. 3 years   

Содержание ATS-S324





























Отзывы: