CAME ATS-S3, Быстрая настройка

Страница: 5 / 12

ATS30AGS: GEOMETRY
• The greater the motor angle, the greater
the opening speed and the slower the
gear motor’s thrust.
• The smaller the motor angle, the slower
the opening speed and the greater the
gear motor’s thrust.
• Lubricate the bushing and fit it into one of the holes on the post bracket.
• The bracket holes allow the opening angle to be changed.
Opening A (mm) B (mm) E (mm) F (mm) C max. (mm)
90 ° 130 130 960 1220 50
90 ° 150 220 910 1290 150
90 ° 120 270 890 1300 200
120 ° 180 130 910 1300 50
Preliminary checks
Side hung gate GEOMETRY (3m)
Tick
1. Check that the gate structure is sturdy enough, the hinges work efficiently and that there is
no friction between the fixed and moving parts
2. Make sure that measurement C does not exceed the value shown in the reference table
3. Make sure that you have fitted opening and closing mechanical gate stops
OUTward OPENING gates
For outward opening gate geometry
please refer to the full Installation Manual.
A
C
B
60
60
E
F