CAME 846NC-0140, Руководство по настройке

Страница: 19 / 48

Pa
ge
7
- M
an
ua
l
FA
00
772
-E
N
- v
er
s.
1
- 0
5/
20
17
- © C
am
e S
.p
.A
. - T
he d
at
a a
nd i
nf
or
m
at
io
n s
ho
w
n i
n t
hi
s m
an
ua
l a
re t
o b
e c
on
si
de
re
d s
ub
je
ct t
o c
ha
ng
e a
t a
ny t
im
e a
nd w
ith
ou
t t
he n
ee
d f
or a
ny a
dv
an
ce w
ar
ni
ng
.
[Learn]
Associates the siren with the multi-purpose receiver.
See the siren manual for information on running auto-recognition.
Siren
Learn
[Description]
Changes the description of the siren using the receiver buttons. The description is
shown on the display when a siren fault occurs.
Siren
Description
[Supervision] (default: YES)
Enables a check of the siren operation. Should the siren not emit any signal for
the time set in the
[SETTINGS]/[T.SUPERVISION] menu, a supervision warning is
triggered at ouput S (see installation manual).
[IN/OUT warning]
(default: None)
Enables the siren warning lights when the system is engaged (input) or disengaged
(output)
[Status] (default: ENABLED if learnt, DISABLED if not learnt)
Manages the radio siren output:
[ENABLED]
the siren is enabled for use.
[DISABLED] the siren is not enabled and cannot be used in the system.
Once the siren has been enabled and auto-recognition run, the siren status chang-
es automatically to
[ENABLED].
[Radio signal]
Shows the radio signal level (from 1 to 6) for each learnt remote control. If the
remote control has not yet been learnt, the radio signal is 0.
The value is shown on the second line of the display as follows:
WL[#-----] = Level 1 signal (low)
WL[###---] = Level 3 signal (medium)
WL[#####-] = Level 5 signal (high)
Siren
Supervision
Siren
IN/OUT warning
Siren
Status
Remote controls
Radio signal
[Learn]
Associates the remote control to the multi-purpose receiver.
See the remote control manual for information on running auto-recognition.
Remote controls
Learn