CAME 846NC-0140, Руководство по настройке

Страница: 18 / 48

Pa
ge
6
- M
an
ua
l
FA
00
772
-E
N
- v
er
s.
1
- 0
5/
20
17
- © C
am
e S
.p
.A
. - T
he d
at
a a
nd i
nf
or
m
at
io
n s
ho
w
n i
n t
hi
s m
an
ua
l a
re t
o b
e c
on
si
de
re
d s
ub
je
ct t
o c
ha
ng
e a
t a
ny t
im
e a
nd w
ith
ou
t t
he n
ee
d f
or a
ny a
dv
an
ce w
ar
ni
ng
.
Inputs
Radio signal
[Description]
Changes the description of the remote control using the receiver buttons. The de-
scription is shown on the display when an alarm or fault connected to an input
occurs.
Remote controls
Description
Remote controls
Configure buttons
Inputs
Learn
Inputs
Description
[Configure buttons]
Select the remote control button to be configured and defined:
[TYPE] (default: TOGGLE)
- Impulse:
pressing the button changes the output status for the time set under
the
[IMPULSE TIME]
menu.
- Toggle: the output status changes every time the button is pressed.
[IMPULSE TIME] (default: 3 seconds
For the impulse button, set the status change time.
[OUTPUT] (default: 8)
Select the output to be associated with the remote control button. Each time the
button is pressed, the chosen output changes status.
[Status]
(default: ENABLED if learnt, DISABLED if not learnt)
Select the remote control to be configured (1-8) and define the status:
[ENABLED]
the remote control is enabled and can be used in the system.
[DISABLED] the remote control is not enabled and cannot be used in the system.
Once the remote control has been associated and auto-recognition run, the status
changes automatically to
[ENABLED].
[Radio signal]
Shows the radio signal level (from 1 to 6) for each learnt device. If the device has
not yet been learnt, the radio signal is 0.
The value is shown on the second line of the display as follows:
WL[#-----] = Level 1 signal (low)
WL[###---] = Level 3 signal (medium)
WL[#####-] = Level 5 signal (high)
Remote controls
Status
[Learn]
Associates the detector to the multi-purpose receiver.
See the detector manual for information on running auto-recognition.
[Description]
Changes the description of the input using the receiver buttons. The description is
shown on the display when an alarm or fault connected to an input occurs.