9.957.038 00
PROFLAME RECEIVER (S)
USE AND INSTALLATION INSTRUCTIONS
Read the instructions before use.
Страница 1: ...9 957 038 00 PROFLAME RECEIVER S USE AND INSTALLATION INSTRUCTIONS Read the instructions before use ...
Страница 2: ...to the gas valve stepper motor Split Flow burner controller and the Fan Control Module with a wiring harness The Receiver is powered by 4 AA type batteries The Receiver accepts commands via radio frequency from the Transmitter to operate the appliance in accordance with with the particular Proflame system configuration The Receiver three position slider switch can be set to one of three positions ...
Страница 3: ...e Remote position Fig 1 Using the end of a paper clip or other similar object insert the end of the paper clip into the hole marked PRG on the Receiver front cover fig 1 The Receiver will beep three 3 times to indicate that it is ready to synchronize with a Transmitter Install the 3 AAA type batteries in the Transmitter battery bay located on the base of the Transmitter With the batteries already ...
Страница 4: ...ss of the remote system LOW BATTERY POWER DETECTION The life span of the Receiver batteries depends on various factors quality of the batteries used the number of ignitions of the appliance the number of changes to the room thermostat set point etc When the Receiver batteries are low No beep will be emitted from the Receiver when it receives an On Off command from the Transmitter This is an alert ...