English
-
4
2
2
ENGLISH
The Proflame Receiver is a device that allows, when used with the Proflame Transmitter, the Proflame Fan
Control Module and in conjunction with the Combination Gas Control and the Split Flow burner controller, to
command the functions of a hearth appliance and is configured to control the on/off primary burner operation,
its flame levels and provides on/off and Smart thermostatic control of the hearth appliance.
The secondary burner is controlled by the Split Flow and can be open or closed via the remote transmitter.
The system controls a remotely actuated 120V/60Hz power outlet, fan speed through six (6) levels and has a
constantly powered 120V/60Hz power outlet.
The Proflame Receiver (Fig. 1) connects directly to the gas valve, stepper motor, Split Flow burner controller and
the Fan Control Module with a wiring harness. The Receiver is powered by 4 AA type batteries. The Receiver
accepts commands via radio frequency from the Transmitter to operate the appliance in accordance with with
the particular Proflame system configuration. The Receiver three position slider switch can be set to one of three
positions: ON (Manual Override), Remote (Remote control) or Off.
IMPORTANT
The Proflame Receiver is integrating part of the Proflame GTMFS System, which consists of three elements:
• Proflame Transmitter
• Proflame Receiver
• Proflame Fan Control Module (FCM)
The Proflame Receiver is designed and realized to be used exclusively with the Proflame Transmitter.
Please use this Installation Manual in conjunction with the Proflame GTMFS System manual, for complete
installation instructions.
3 Positions Slider
PRG Key
Fig. 1:
Proflame Receiver body.
14 PIN terminal
