Page 4 of 33
CV-550 SPK V3 REFERENCE MANUAL
INSTALLATION INSTRUCTIONS
1. OVERVIEW
1.1
Introduction
This version of keypad uses the new 32-bit microcontroller ARM core design with enhanced beneficial functions. It’s a new
generation of multi-function access controller with a card reader mode, single-door mode, interlock mode, Demo mode etc.
All of them could be widely used in office buildings, homes, schools, condominium, apartments, factories, fenced in yards and
other places.
1.2
Function features
•
Built-in reader reads 125 kHz proximity credentials (EM& HID format).
•
Vandal-resistant metal backlit keypad.
•
Single-door controller can be set to Reader mode, Interlock mode and demo mode.
•
Reader mode Wiegand output is configurable by the installer.
•
Authentication by Card and PIN or Multi-cards to open the door.
•
Administrator Super-open-card and Super-open-password to open door.
•
Convenient administrator Add-card, Delete-card, Anti-duress-card, Authorization-card, and Normal-open card operation.
•
Quick access to the management menu using admin password card feature.
•
User card capacity up to 20,000, the admin programming card capacity up to 21.
•
Quick access to the management menu using Set-card operation
•
Doorbell button available using the “#” key once it is configured.
•
In Reader mode, the keypad red and green LED indicators can be controlled externally.
•
Innovative infrared tampering detection technology. The keypad can alarm 24/7 and it will not be affected by ambient light.
•
Door Strike or maglock controlled by output relay contacts (NO, NC, COM).
•
Alarm and doorbell signal output by MOS and it can be the driver of an alarm device or a doorbell.
1.3
Keypad exterior features
