iPad
3. Open a new page in your internet browser (Internet Explorer, Safari, Chrome etc).
In the address bar of your browser, type 192.168.1.1 followed by 'enter' and the
Minx Air setup page will be displayed.
6HOHFW\RXUKRPHZLÀQHWZRUNIURPWKH6HUYLFH6HW,'66,'GURSGRZQOLVW
of choices.
7KHOLVWVVKRZVDOOWKHQHWZRUNVWKH0LQ[$LUFDQÀQGORFDOO\
5. Now type your home Wi-Fi/Network password into the red box, and click the
'Apply' button.
Note:
If you don't know your Wi-Fi password key, it's commonly found on a label on
your internet modem/router.
,I\RXDUHKDSS\WKDW\RXKDYHHQWHUHG\RXUGHWDLOVFRUUHFWO\FOLFN2.WRÀQLVK
The Minx Air set-up page may now display an 'error' or 'no data' received' type
message. Don't worry, this is normal. You can now close your internet browser.
7. After a few seconds, the Minx Air will be connected to your network (successful
connection is indicated by a solid green light on the rear of the product). This
can take up to 30 seconds.
Note:
²,IWKHOLJKWRQWKHUHDUFRQWLQXHVÁDVKLQJJUHHQ
, this indicates that the Minx
$LUKDVEHHQXQVXFFHVVIXOZLWKWKHZLÀFRQQHFWLRQ&DUU\RXWDIDFWRU\UHVHWDQG
repeat the process.
– If your computer/tablet has not already done so automatically, change the Wi-Fi/
network setting on your computer/tablet back to your home network.
Connecting to a wireless network using WPS
If your router supports WPS (Wi-Fi Protected Setup) then this is a simple method to
FRQQHFWWKH0LQ[$LUWR\RXUQHWZRUNZLWKRXWQHHGLQJWRNQRZ\RXUZLÀQHWZRUNNH\
or broadcast network name SSID.
WPS allows two devices to discover each other for a short time (usually a minute or
two) after the WPS buttons have been pressed on both devices.
To connect using WPS simply press the WPS button on your router (please consult
router instructions for details) then shortly after press the WPS button on the rear
SDQHORIWKH0LQ[$LUEULHÁ\SUHVVLWRQFH
7KH:36OLJKWRQWKHUHDURIWKH0LQ[$LUZLOOÁDVKRUDQJH
> green
> red
for up to 2 minutes whilst the Minx Air looks for your router.
If the connection is successful connection the WPS light will turn solid green and
\RXUZLÀFRQQHFWLRQLVUHDG\
Connecting to a wired network
Note: Make sure that the Minx Air is switched off before plugging in the ethernet
cable.
Plug one end of a network cable (Category 5/5E straight through Ethernet cable)
into the LAN port on the back of the unit and the other end directly to a free port
on your router.
Note:
Only connect the LAN port of the player to an Ethernet port that supports
%$6(7RU%$6(7;&RQQHFWLQJWRDQ\RWKHUSRUWVRUMDFNVVXFKDVDSKRQH
MDFNFDQGDPDJHWKHXQLW1RZWXUQRQ\RXU0LQ[$LU
The Minx Air should automatically connect to your network via DHCP; this means it
will be given an IP address by your router automatically.
127(<RXU0LQ[$LUPXVWÀUVWEHFRQQHFWHGWRDQHWZRUNYLD:L)LRU
Ethernet for Internet Radio or Airplay streaming to be available.
9
ENGLISH
