4
1
3
6
5
351R
azur
9
ENGLISH
Front panel display
Loudspeaker connections
1
HDMI inputs
Indicates the current HDMI source input.
TONE
Indicates whether the Tone controls are in use.
3
PCM
Indicates the 351R is receiving two channel or multi-channel PCM.
4
Surround decoding mode indicators (PCM, Dolby
Digital, DTS etc)
6KRZVWKHFXUUHQWGHFRGLQJPRGH'ROE\'LJLWDO'76HWF,QFRQMXQFWLRQZLWK
the Output Channel indicators these give full details of the current processing
mode.
5
Main information display
Shows the current source selected, also the surround mode and station
name/frequency when in tuner mode etc.
6
Output channel indicators
Shows the currently active channels depending on decoding mode and
source material. Channel icons lit indicate channels in the source material.
,FRQVZLWKDER[DURXQGWKHPLQGLFDWHFKDQQHOVEHLQJRXWSXWE\WKH5
Display examples
Indicates a 5.1 DTS master audio source being played back. The lit LFE
indicates a low frequency effects channel is present in the source material.
:KHQWKLVLFRQLVQWER[HGLWLQGLFDWHVWKH/)(FKDQQHOLVQRWEHLQJVHQWWRD
VXEZRRIHUEXWZLOOEHPL[HGLQWRWKHIURQWOHIWDQGULJKWLQVWHDG
Indicates a 2.1 output created in the digital domain from analogue input
material.
To avoid damaging the speakers with a sudden high-level signal, be sure to
switch the power off before connecting the speakers. Check the impedance
of your speakers. Speakers with an impedance of 8 ohms (each) are
recommended.
The coloured speaker terminals are positive (+) and the black speaker
terminals are negative (-). Make sure correct polarity is maintained at each
speaker connector or the sound can become weak and "phasey" with little
bass.
3UHSDUH WKH VSHDNHU FRUGV IRU FRQQHFWLRQ E\ VWULSSLQJ RII DSSUR[LPDWHO\
10mm (3/8") or less (no more than 10mm, as this could cause a short-circuit)
of the outer insulation. Twist the wire tightly together so there are no loose
ends. Unscrew the speaker terminal knob, insert the speaker cable, tighten
the knob and secure the cable.
Note:
$OO FRQQHFWLRQV DUH PDGH YLD ORXGVSHDNHU FDEOH H[FHSW LI XVLQJ DQ
active subwoofer which would be connected via a standard RCA phono
cable. Banana Plugs (4mm standard) connected to the speaker cable are
recommended for direct insertion into the speaker terminals.
3OHDVHUHIHUWRWKH6SHDNHU&RQÀJXUDWLRQVHFWLRQRIWKLVPDQXDOIRUPRUH
information on 5.1 speaker setups.
Aerial connections
FM aerial
Connect an aerial to the FM 75 ohm socket (a simple wire aerial is supplied
RQO\IRUWHPSRUDU\XVH([WHQGWKHOHDGDQGPRYHWKHDHULDODURXQGXQWLO\RX
get the best reception. For continued use, we strongly recommended using a
75ohm outdoor FM aerial.