Chapter 7: PTP 820S Detailed Configurations Description
1+1HSB/2+0 Single Polarization Direct Mount
phn-3972 004v000
Page 7-15
Note
For 15 and 18 GHz frequencies, two O-Rings are supplied in the Twist kit and must be
mounted in the twist grooves.
For 6 GHz frequency, a gasket is used instead of an O-Ring. The gasket must be
mounted between the twist and the RFU-C Coupler kit.
1 Mount the twist to the coupler using the O-Ring and four screws supplied in the Twist kit and
tighten the screws.
Caution
Make sure the polarization mounting direction of the twist to the coupler is according
to the antenna polarization.
H
V