Cambium Networks PMP 450 AP, Руководство по настройке

Страница: 307 / 649

Chapter 1: Configuration Configuring a RADIUS server
Page
1-279
Selection Key This option allows operators to choose which authentication key is used:
Use Key above means that the key specified in Authentication Key is used
for authentication
Use Default Key means that a default key (based off of the SM’s MAC
address) is used for authentication
Encryption Key Specify the type of airlink security to apply to this AP. The encryption
setting must match the encryption setting of the SMs.
None provides no encryption on the air link.
AES (Advanced Encryption Standard): An over-the-air link encryption
option that uses the Rijndael algorithm and 128-bit keys to establish a higher
level of security. AES products are certified as compliant with the Federal
Information Processing Standards (FIPS 197) in the U.S.A.
SM Display of AP
Evaluation Data You can use this field to suppress the display of data about this AP on the
AP Evaluation tab of the Tools page in all SMs that register.
Web, Telnet, FTP
Session Timeout Enter the expiry in seconds for remote management sessions via HTTP,
telnet, or ftp access to the AP.
IP Access Control You can permit access to the AP from any IP address (IP Access Filtering
Disabled) or limit it to access from only one, two, or three IP addresses that
you specify (IP Access Filtering Enabled). If you select IP Access Filtering
Enabled, then you must populate at least one of the three Allowed Source
IP parameters or have no access permitted from any IP address
Allowed Source IP 1 If you selected IP Access Filtering Enabled for the IP Access Control
parameter, then you must populate at least one of the three Allowed Source
IP parameters or have no access permitted to the AP from any IP address.
You may populate as many as all three.
Allowed Source IP 2 If you selected IP Access Filtering Disabled for the IP Access Control
parameter, then no entries in this parameter are read, and access from all IP
addresses is permitted.
Allowed Source IP 3
Web Access The Radio supports secured and non-secured web access protocols. Select
suitable web access from drop-down list:
• HTTP Only – provides non-secured web access. The radio to be
accessed via
http://<IP of Radio> .
• HTTPS Only – provides a secured web access. The radio to be accessed
via
https://<IP of Radio >.
• HTTP and HTTPS – If enabled, the radio can be accessed via both http
and https.
SNMP
This option allows to configure SNMP agent communication version. It can
be selected from drop-down list :
• SNMPv2c Only – Enables SNMP v2 community protocol.
• SNMPv3 Only – Enables SNMP v3 protocol. It is secured communication
protocol.