Cambium Networks PMP 450 AP, Руководство по настройке

Страница: 119 / 649

Chapter 1: Configuration General configuration
Page
1-91
Latitude
Longitude
Height
Physical radio location data may be configured via the Latitude, Longitude
and Height fields.
Latitude and Longitude is measured in
Decimal Degree while the Height is
calculated in Meters.
PTP 450b BHM
Table 28 General page attributes – PMP 450b BHM
Attribute Meaning
Link Speed From the drop-down list of options, select the type of link speed
for the Ethernet connection. The default for this parameter is that
all speeds are selected. The recommended setting is a single
speed selection for all APs and SMs in the operator network.
Ethernet Link
Enabled/Disabled
Specify whether to enable or disable Ethernet/802.3 connectivity on the
wired port of the SM. This parameter has no effect on the wireless link.
When you select Enable, this feature allows traffic on the Ethernet/802.3
port. This is the factory default state of the port. When you select
Disable, this feature prevents traffic on the port. Typical cases of when
you may want to select Disable include:
The subscriber is delinquent with payment(s).
You suspect that the subscriber is sending or flooding undesired
broadcast packets into the network, such as when
• a virus is present in the subscriber’s computing device.
• the subscriber’s home router is improperly configured.
Sync Input See
Configuring synchronization
on page
1-106