Cambium Networks ePMP, Руководство пользователя

Страница: 233 / 478

CAMBIUM NETWORKS
026v003
233
Attribute Meaning
Static Routes
Route When Enabled, it allows the operator to create static routes that will
apply to both the Wireless and Ethernet interface of the SM.
This allows operators to configure a custom table of explicit paths
between networks. Static routing is often used as a method to
reduce the overhead of processing dynamic routes through a
network when the specific path is known (or, it is simpler to define a
specific path). Static routing is also used as a backup when dynamic
routing protocols fail to complete a route from one network to
another.
In router mode, the Static Routes table is referenced by the SM to
forward/filter packets to a particular destination configured by the
user based on the IP addressing information contained in the table.
Since static routes do not change with network changes, it is
recommended to only use static routes for simple network paths
which are not prone to frequent changes (requiring updates to the
routes configured on the ePMP SM).
It is important to consider each hop in a static route’s path to ensure
that the routing equipment has been configured to statically or
dynamically route packets to the proper destination. Otherwise, the
network communication will fail.
Note
Network Address Translation (NAT) is not performed when the SM
is in Router mode.
Target Network IP Configure the target subnet/network’s IP address to which the SM
should route the packets.
Subnet Mask Configure the subnet mask for the Target Network IP address.
Gateway Configure the gateway to which packets that match the Target
Network IP Address and Subnet Mask are sent.
Description Provide a description to easily identify the static route and its
purpose.
Separate Wireless Management Interface
Separate Management IP Disabled: When disabled, the Wireless IP is the management
interface for the SM.
Enabled: When enabled, the IP Address below is the management
interface for the SM.