Cambium Networks ePMP, Руководство пользователя

Страница: 271 / 478

CAMBIUM NETWORKS
026v003
271
Table 117 SM eDetect attributes
Attribute Meaning
eDetect
Detection Duration Configure the duration for which the SM scans for interferers.
Caution
During the scanning period, the SM must be connected to the AP
and passing user traffic, and there cannot be any outage (unlike
running a Spectrum Analyzer). There may be a negligible
degradation in the SM’s throughput.
Start/Stop Use to start or stop the interference detection.
Export to CSV Choose this option to export the detection results to .csv format.
Status Current status of the Interference Detection tool.
Detection Results Use the Detection Results table to monitor interferers at the SM and
their key RF parameters.
Device Instant Health This is an indicator of the device’s health in terms of channel conditions
in the presence of interferer(s).
Green: Indicates that the channel is relatively clean and has good C/I
levels (>25dB). The interference level is low.
Yellow: Indicates that the channel has moderate or intermittent
interference (C/I between 10dB and 25dB).
Red: Indicates that the channel has high interference and poor C/I levels
(<10dB).
Device MAC The MAC address of the SM’s wireless interface.
Device RSSI (dBm) The Received Signal Strength Indicator, which is a measurement of the
power level being received by the device’s antenna.
Device MCS Modulation and Coding Scheme – indicates the modulation mode used
for a radio’s receiver side, based on radio conditions (MCS 1-7, 9-15).
Interferers’ MAC The MAC address of the interferer’s wireless interface.
Interferers’ RSSI
(dBm) The Received Signal Strength Indicator, which is a measurement of the
interferer’s power level being received by the device’s antenna.
Interferers’ MCS Modulation and Coding Scheme – indicates the modulation mode used
by the interferer, based on radio conditions (ex: MCS 1--15).