Manuale Uniflam Idro rev. 00
30
WARNING: Proceed to clean the glass only if it is completely cold and do not use abrasives (Use
specific products available on the market). The cleaning of the iron part has to be done with non-
aggressive products to avoid any damage to the paint.
WARNING: The Company is not responsible for any malfunctions of the stove caused by poor or
missing maintenance.
CAUTION: Remember that maintenance is not covered by warranty as specified in the appropriate
certificate.
5.1 Problems and Solutions
This section of the manual has been designed to give the user the change to a quick and simple
intervention in the case of inconveniences that can occur.
The table below summarizes the actions to take when there is a problem: the left column shows
the problem, in the right there is described the action to undertake to solve the problem.
PROBLEM
WHAT TO DO
No electrical energy or acoustic signal (water in the boiler
close to 100°C)
-
Open the door
-
Do not put further wood
-
Try to distance the wood pieces from each other
-
In case the stove is installed to produce hot
sanitary water, open a water tube to slow down
the water temperature in the boiler
No tension on the command
-
Make sure that all wires are in order
