Manuale Uniflam Idro rev. 00
15
CAUTION: The drain valve should be positioned at the lowest point of the water circuit.
IMPORTANT NOTICE: Please note that all pictures shown in the manual are provided free of charge
and just as indication. Due to this, Calux S.r.l. does not assume any responsibility.
3.3
Installation instructions for the aesthetical part of the product (UNIFLAM Series)
The UNIFLAM stove comes in two separate packages, one containing the pro-
product and the other containing the ceramic coating. For the assembly of the aesthetics a screw
driver or other tool to unscrew crossed head screws is needed.
WARNING: The following pictures showing the operation of fitting of the ceramics show stove
model UNIFLAM 34 KW with oven. The given instructions are applicable for the entire range of
UNIFLAM stoves. For the size and composition of the ceramics kit, refer to the summary table at
the end of this paragraph.
1. To assemble the front ceramics you have to remove the right panel of the stove, as shown in
figure 3.5.
2. Place the ceramics over the heating chamber on front of the oven.
Place the larger piece in the centre as shown in Figure 3.5.
3. Place the ceramics also over the oven.
Place the larger piece in the centre as shown in Figure 3.5.
4. Replace the right panel on the stove.
