Caltech Calaer 2 kW, Руководство по установке

Страница: 52 / 60

15. Troubleshooting
50

Does the fuel pump start to tick?
o
Check that the cable is connected and fastened.
o
Check that there is fuel in the tank and in the fuel lines.

Heater does not start but the fan is running and the fuel pump is
working.
o
Check that there is nothing blocking the combustion air
intake and exhaust.
o
Check that the fuel lines are intact and not broken or
blocked at any point.
o
Check for a blocked fuel filter.
o
Check that there is not a significant amount of water
intruded into the burner.
Heater stops in the middle of operation

Check that there is fuel in the tank.
o
If the fuel tank was empty and there is air in the fuel line,
follow the “initial start-up” procedure described in the
Operational Instructions chapter.

Make sure that there is no fuel leakage anywhere in the system.

Check that there is nothing blocking the combustion air intake and
the exhaust.

Check that there is nothing blocking the heating air ducts and
vents.