TYPE R
CONTENTS
1. Power up the Core and connect a PC
2. Access the basic Core configuration
3. Install a Software Upgrade Licence key (Optional)
4. Configure the Core for Surface Panels
5. Configure Network Switches & Devices
6. Configure Surface panels ID, IP addresses & Subnet masks 13
7. Connect Surface Switch & Surface Panels to the Core
8. Access Assist setup and create a new show
9. Connect to Assist from the Studio or Management subnets 16
10. Upload control layouts to the soft panels
11. Create layouts with Type R Soft Panel Designer
12 Update System Software & AoIP Devices Firmware
13. Configure AoIP Port & Connect server IP addresses
14. Connect Audio Switch and AoIP Ports to the Core
Surface Panels - Suggested Settings