To create a new
Show
follow these steps:
1. Open Google Chrome, type
172.16.255.25
into the address bar and press enter to navigate to the
Assist
landing page.
2. In the menu on the left-hand side, navigate to
Shows & snapshots
then
Shows
in the sub-menu.
3. In the footer menu select
New
, the
Create a Show
dialogue will be displayed.
Select the
Default_Show
template show and click
Next
.
4. Fill in the form to label and describe your Show, then click
Create New Show
.
You will be automatically redirected to the
Fader layout
screen.
5. From here you may begin to configure your mixer with DSP paths, routing etc.
However we would recommend that you continue to complete the setup before doing this.
Please refer to the Type R Assist Manual or Type R Assist and Console Operation Manual for more guidance.
8. ACCESS ASSIST SETUP AND CREATE A NEW SHOW