SURFACE PANELS - SUGGESTED SETTINGS
Fader
Panel
Fader Range ( e.g. 1-6 )
Serial Number
Panel ID
[switch setting]
IP Address
Subnet
mask**
1st
1 [00000001]
172.17.101.1
/16
2nd
2 [00000010]
172.17.101.2
/16
3rd
3 [00000011]
172.17.101.3
/16
4th
4 [00000100]
172.17.101.4
/16
5th
5 [00000101]
172.17.101.5
/16
6th
6 [00000110]
172.17.101.6
/16
7th
7 [00000111]
172.17.101.7
/16
8th
8 [00001000]
172.17.101.8
/16
The suggested settings for each surface panel connected to the first mixer in a Type R system are shown below. Use the
tables below to configure your surface panels and to record the serial number, fader range and label details of each panel
for later reference. After configuring the surface panels, you may want to attach labels to them. A blank label sheet is
provided with the Type R core for this purpose. A printer template for this Label sheet is available to distributors on the
Calrec Website.
Soft
Panel
Type
(LSP/SSP)
Panel Label
( e.g. Guest 1 )
Serial Number
Panel ID
[switch setting]
IP Address
Subnet
mask**
1st
11 [00001011]
172.17.101.11
/16
2nd
12 [00001100]
172.17.101.12
/16
3rd
13 [00001101]
172.17.101.13
/16
4th
14 [00001110]
172.17.101.14
/16
5th
15 [00001111]
172.17.101.15
/16
6th
16 [00010000]
172.17.101.16
/16
7th
17 [00010001]
172.17.101.17
/16
8th
18 [00010010]
172.17.101.18
/16
**Subnet masks are displayed in CIDR notation