TYPE R SOFT PANEL DESIGNER INTERFACE
10. UPLOAD CONTROL LAYOUTS TO THE SOFT PANELS
Type R systems come with a selection of
Soft Panel layout files already available.
1. To upload a layout file to a Soft Panel,
navigate to
Show setup
then
Soft
panel layout
in
Assist.
2. Select the panel in the list on the left
side, then select a layout file in the
table on the right side.
3. Click
Apply
. The layout will be
immediately applied to the panel
4. Repeat this process for each Soft
Panel in your surface
Please refer to the
Type R Assist and
Console Panel Operation
manual for
more information on Type R Soft Panel
Layouts.
11. CREATE LAYOUTS WITH TYPE R SOFT PANEL DESIGNER
To create your own Soft Panel Layouts,
the
Type R Soft Panel Designer
application is required. This can be
downloaded from
Please login using the case-sensitive
credentials below:
Account: TypeR
Password: tYoarEdQ
Please refer to the
Type R Soft Panel
Designer
manual for more information
on the Type R Soft Panel Designer
application.
TYPE R SOFT PANEL SOFT PANEL LAYOUT ASSIST PAGE