Calrec BRIO 36, Руководство пользователя

Страница: 53 / 210

53
Tap to select a single online resource on the left (hold and drag or drag handles to select multiple resources) then tap
ADD TO REQUIRED LIST
at the bottom left of the online resources screen. The resources will then appear in the
Required List on the right. Note: they are shaded green, with a green ‘required’ tag attached.
This is mirrored in the online list on the left so the user can quickly see which resources they have already added.
If any of the resources in the Required List go offline, they will be shaded red with an ‘offline’ tag attached.
The ‘require’ tag can be seen in the image below.
Adding and Removing Resources
To remove a resource from the list, select it, then tap REMOVE FROM REQUIRED LIST .
Note: the built-in Brio I/O is always present and is shown in Figure 2 at the top of the list.
Boxes at Different Sample Rates
The show in Figure 2 is a 96kHz show, the sample rate field shows that although the Brio is set to the correct sample rate
the AoIP box isn’t, this is because AoIP boxes do not currently operate at 96kHz
FIGURE 2 -
THE ‘REQUIRED LIST’