Calrec BRIO 36, Руководство пользователя

Страница: 185 / 210

185
Assigning GPIs
To assign a GPI to a function:
1. Tap
GPI
in the screen header and select the box in which the GPI port is installed.
2. Tap
FUNCTIONS
in the screen header and select the function type for the GPI to control.
Alternatively, tap
FADER CUT
or
FADER PFL
and select the relevant I/O box for the port to be controlled.
3. Select a GPI on the left, select a destination on the right and tap
CONNECT
.
4. Decide if the GPI needs to be inverted (active low rather than active high).
Moving a GPI destination
1. Tap a destination and tap MOVE in the screen footer.
2. Select a new destination and tap MOVE again, or tap CANCEL to discard any changes.
Removing a Destination
1. Tap one or more destinations and tap REMOVE in the screen footer.
2. Tap REMOVE again to confirm or tap CANCEL to discard any changes.
FIGURE 1 - GPI USAGE