1142 Radio Portable Manual - O&M Manual V6
Z:\AA MANUALS & INSTRUCTIONS 2017\1142 Radio System\1142 Radio Portable Manual - O&M Manual V6.docx
Page
18
of
20
The 1123 Pairing over door lamp panic alarm system
The 1123 Radio Over Door Lamp is used to alert staff to any panic buttons that have been
activated in the vicinity.
All Call Aid panic buttons that are to be used with this Over Door Lamp will need to be paired.
Please refer to the pairing instructions. When supplied as a kit the equipment is paired at
manufacture.
A maximum of five units can be paired to the 1123 Over Door Lamp.
When any panic buttons are pressed, the 1123 unit will begin to flash and a low volume tone will
sound (the low volume is for the personnel nearby to hear but not the person in the room who is
causing the incident).
To silence the 1123 unit, a cancel signal must be sent from any paired panic button.
The 1123 unit is powered via a 12V PSU. The PSU is powered from any mains 240V source. The
PSU can be connected to the mains via the supplied plug or a suitable 3amp rated fused spur
(if applicable).
Low Battery Alerts
When the 1123 over door lamp detects a low battery when any paired unit is triggered, a low
battery warning is stored.
When the system is idle, the over door lamp will flash and beep every 5 minutes to warn the
users. The low battery alert can be removed by replacing the battery in the paired unit.
