Calix 560 SBU ONT, Руководство по установке

Страница: 23 / 60

Proprietary Information: Not for use or disclosure except by written agreement with Calix.
Chapter 3
ONT Installation
Overview
This chapter provides installation instructions for installing the Model 560 ONT onto the
FTTH network. Final set-up and testing is also included.
ALERT! A Class I laser product is used in this equipment. Use an optical
power meter to identify active fibers. Never assume laster power is turned
off or that the fiber is disconnected at the other end. A protective cap or
hood must be place over any radiating bulkhead receptacle or optical fiber
connector.
CAUTION! Use of controls, adjustments, or procedures other than those
specified herein may result in hazardous radiation exposure.
Tips on Handling Fiber Optic Cable
Follow these tips when handling fiber optic cable for trouble free performance:
y Keep fiber optic cables and splicing equipment clean at all times. Use manufacturer
approved solvents and cleaning applicators. For more detailed information on fiber
optic cable installation and maintenance,
see Chapter 4. (see "Fiber Splicing
Techniques" on page 41)
y Take care to use the proper connectors for the application. Mismatching connectors
or the use of the wrong type of connector can result in the loss of optical power and
damage to the connectors.
© 2001-2007 Calix. All Rights Reserved.