![background image](http://html1.mh-extra.com/html/calira/lg-416-ds-iu/lg-416-ds-iu_operating-instructions-and-installation-instructions_3447148026.webp)
26
Procedures in the event of faults
The device is maintenance-free. However, if any faults do
occur, please proceed according to the following table.
Fault
Action
The battery is not being
charged.
– Check all connections from the
charger to the battery. Pay at-
tention to the correct polarity.
Unplug the female device plugs
on the device and unclamp the
batterie. The device should be
disconnected from all power
sources. Clamp the batterie
on again and then plug in the
female device plugs. Check the
fuses and the mains connection.
– Check the fuses and the mains
connection.
The maximum charging
current is not reached.
– The device overheats. Ensure
better ventilation of the device.
None of the faults
described here seems
to apply. But the device
still does not work.
Please contact the manufacturer.
Parallel operation
In parallel operation, the current drawn up by electrical equip-
ment should be less than the maximum charging current of
16 A. This is the only way to ensure that the battery is being
charged even though consumers are being supplied.
Maintenance instructions
The device must always be disconnected from the
mains before any maintenance!
Clean the device and the ventilation slots with a dry, lint-free
cloth.