Bluetooth Operations
Answering An Incoming Call
User can press the button to answer /
accept the incoming call.
1. When there is an incoming call, the ring
tone is output from the car speaker, and
the caller number will be shown on the
display. If the incoming call has no caller
number, the display will shown
“UNKNOWN”.
2. Always press the button to answer/
accept the call after display showing the
“Caller Number” or “UNKNOWN”.
3. The audio output of the current mode will
be muted and the ringing tone will be
heard. If an incoming call do not want to
be answered, user can use the to
adjust the ring tone level.
4. If there is an incoming call during the
standby mode (Ignition on & Power Off),
this unit will automatically switch on.
5. While there is an Incoming call or during
talking mode, only the / / /
buttons are functional, all the other button
function keys are disable.
Ending A Call
Rejecting An Incoming Call
Making An Outing Call
To end a call, press the “CLEAR” button,
and the unit will automatically switch back to
the previous mode and release the “Mute” at
the same time.
User can press the “CLEAR” button to
reject an incoming call.
User can dial the phone number either on the
Mobile Phone or simply directly entering phone
numbers on the front panel of this unit.
1. Press the button to start making an
outgoing call, and the below Phone
Keypad will be shown on the TFT:
2. Use the to navigate thru the numeric
0-9 *, # & +.
3. Press the button to confirm the input
of the selected number.
4. Use the button to clear the wrong
input number.
5. Once the phone number has been
entered completely, Press button to
start dialing the call, and the below
display will show on the TFT:
TIPS
During the Calling mode, if need to input any
number, for example: the Pin Code Input or
Service Number Dial Input, user can Short
press the button to enter into the numeric
input interface, and then rotate to
navigate thru the desires input number and
press the button again to confirm the
input of the selected number.
Handsfree Phoning
NOTE
While there is an outgoing call or during
talking mode, only the / / /
buttons are functional, all the other
function keys are disabled.
User can use the to adjust the talking
volume level.
To end the conversation,press button.
The unit will switch back to the previous
mode automatically. The mute of the
previous mode will be released at the
same time.
During the talking mode, if the Ignition is
being turned off, the unit will keep the
conversation even if the Ignition is
Switched off. After the conversation is
finished, user can press button to
switch off the unit.
E - 28