24
Cover removal
Hold either the left or the right end
of the box up and at an angle. Use
body for stabilizing relay box.
Insert screwdriver and push tab
inward, cover should release from
base.
Roll cover off base.
Transformer Installation
Mount box on stable surface using
level.
Remove transformer(s) from
packaging.
Slide bottom end of transformer
into bottom latch.
Snap top of transformer into latch
arms.
Feed wiring through hole near the
top of the transformer and insert
transformer plug into the socket.
Repeat process for 2nd
transformer if using six valve relay
box.
Mounting
: Do not mount to a surface that exceeds 115°F (45°C). The unit must
be only located in dry interior locations. Use only copper conductor supply wire
suitable for at least 105° C. All circuits must have a common disconnect and be
connected to the same pole of the disconnect. It is not suitable for installation
in hazardous locations.
