10 -
USER MENU
Upon completing data entry, two different views may be displayed (depending on the data entered):
A) OUT Date the same as the current one
The
thermostat star ts the
programmable
countdown (e.g. in the figure: 388 hours) until
exhausting the programmed hours; in WINTER
mode the connected user will only be activated if the
room temperature should go below the Set
antifreeze temperature point (default 6.0 °C). At the
end of the countdown the HOLIDAY program will re-
activate your usual program.
Set
OK
Menù
back
SetT
0
2
4
6
8
10
12
14
16
18
20
22
The
thermostat goes back to the program running before entering
programmable
the data in the HOLIDAY program, pending its activation.
The screen of the HOLIDAY program will appear on the display for 2 seconds every
minute as a reminder that it is in
stand-by.
When the
has elapsed, the
thermostat starts the
stand-by time
programmable
countdown (example in figure: 388 hours) until exhausting the programmed hours;
in WINTER mode the connected user will only be activated if the room temperature
should go below the Set antifreeze temperature point (default 6.0 °C). At the end of
the countdown the HOLIDAY program will re-activate your usual program.
display for 2 seconds every minute
B) OUT Date after the current one
Normal operation screen
To cancel the HOLIDAY program with postponed activation, through the path
select item
confirm with
Menu
;
-> SEt PROFILE - >
SEt HOLIDAY
OK
press
twice to quit.
back
EN
Set
OK
Menù
back
SetT
0
2
4
6
8
10
12
14
16
18
20
22
Set
OK
Menù
back
SetT
0
2
4
6
8
10
12
14
16
18
20
22
In the event the antifreeze temperature has been permanently disabled (paragraph 10.1) or in "SUMMER" operation, the HOLIDAY
program will keep the connected user disabled (e.g. boiler or conditioner) throughout the whole programmed time.
63
When the
program is running:
HOLIDAY
- press
keys to change the independent antifreeze temperature Set point
(unless previously disabled);
- press
the HOLIDAY program before the end of the programmed hours.
OK
to cancel
The
thermostat resumes normal operation re-enabling your
program.
programmable
usual
Set
Menù
back
SetT
0
2
4
6
8
10
12
14
16
18
20
22
OK
Example
