11 - CONFIGURATION MENU (installer)
11.13 - ENTERING AND MANAGING PASSWORDS
11.13.2 - PASSWORD MODIFICATION OR CANCELLATION
When required, enter the previously created User or Installer password follow the
,
above procedure and access item
or
:
PASSWORD SEt U
InSt
t
- enter 4 hyphens (- - - -) to cancel the password
- enter 4 new digits to modify the password
Information reserved to installer or expert user only
in the event of forgotten password enter the reset code
when user or installer access is requested.
Some functions of this
thermostat may be protected by a user
programmable
Password
and/or installer
, so that they may be only modified by
(U )
(Inst)
t
authorised persons. No password is active in factory settings.
•
Using the
keys, enter 4 digits (dashes not included) between
and
0000
9999
«OK».
, individually confirm them with
With a password, certain quickly activated functions may still be used (see
chapter 7).
11.13.1 - ENTERING THE NEW PASSWORD
•
From the path
press
Menu key ->
«OK»
CONFIGUR Set -> PASSWORD SEt ->
to access the screen to create a secret
code (
confirm
User
PASSWORD SEt Ut
),
with
, or select item
with the
keys, and confirm
OK
PASSWORD SEt InSt
with
to create the
code.
OK
Installer
Press the
key to exit.
back
The
password lets you access all
«Installer»
«Configurations» (CONFIGUR
SEt)
User
menu functions as well as
settings.
The
password lets you access available functions through the
key.
«User»
Menu
If an installer password is also present the
menu may not be
CONFIG
SEt
UR
accessed.
The secret user or installer code will be cancelled.
80
EN
Menù
back
SetT
OK
OK
OK
OK
OK
OK
OK
enter the user password as
an example to the side
OK
example:
Menù
back
SetT
OK
OK
