Vanguard 3000 Multicarrier Cellular Data Modem & IP Router PN 134732-VG3000 Rev. D| Page 69
including the country code prefix. Select the button for a Sender (1-3), and then enter the address in the
adjacent field. If all three addresses are disabled, then commands will be accepted from ALL senders.
Respond only to Senders
For security, command responses, including error messages, can be restricted to be returned only to the
registered Sender SMS addresses.
Replace Country Code
This allows you to change the country that the responder uses, which can be useful when monitoring routers
across national borders.
With … in responses
The string you wish to substitute for the country code.
3.9.2
RSSI TRAPS
Figure 46: Diagnostics — RSSI Traps
RSSI Traps
Generate SNMP traps and notifications when the cellular signal strength (RSSI) falls outside of specified thresholds.
RSSI Traps
Selecting Enable allows the monitoring of the cellular signal strength.
Low Threshold
Send an SNMP Trap message when the average RSSI falls below this value.
