Vanguard 3000 Multicarrier Cellular Data Modem & IP Router PN 134732-VG3000 Rev. D| Page 1
1
PRODUCT OVERVIEW
The Vanguard 3000™ Router from CalAmp — simple, reliable wireless connectivity without limitations – GSM and
CDMA connectivity in a single device.
Uniquely designed for operation on both GSM and CDMA networks, Vanguard router offers more choice and
redundancy in carrier networks. This single, flexible platform addresses a variety of wireless communications needs
with serial to IP conversion, over-the-air configuration and system monitoring for optimal connectivity. This ready to
deploy broadband router enables wireless data connectivity for up to two LAN and one serial device over public cellular
networks at 3G speeds.
Equipped for a broad range of fixed applications, Vanguard router provides reliable connectivity for Programmable
Logic Controllers (PLCs), Remote Terminal Units (RTUs), Ethernet web cameras or any other Ethernet or serial device.
For mobile applications, this intelligent broadband router incorporates an optional highly sensitive 16-channel GPS
receiver and an intelligent algorithm that offers outstanding receive sensitivity and improved accuracy, integrity and
availability of GPS signals. An optional, built-in Wi-Fi access point also allows your tethered devices to remain
connected even when you leave the vehicle.
This widely deployed wireless solution delivers countless software capabilities. OEMs may tailor the Vanguard router
by loading their application on the Open Developer Platform (ODP) which allows a Linux application to run on a
partition of the embedded flash memory.
1.1
MODULE IDENTIFICATION
The module identification label can be found on the bottom of your Vanguard router. This label contains the product
part number, the serial number, FCC and IC IDs as well as carrier-specific information that will be required when
activating your data account.
Figure 1: Fixed model identification label
Figure 2: Mobile model identification label
