Vanguard 3000 Multicarrier Cellular Data Modem & IP Router PN 134732-VG3000 Rev. D| Page 66
Host Port Number (1024-65535)
Specify the local port for the TCP server or the remote port for the UDP client.
Report every ( ) seconds
Triggers the sending of a new remote report if the time since the last remote report exceeds the specified
number of seconds. A value of 0 disables this filter and triggers only on distance.
Report every ( ) meters
Triggers the sending of a new remote report if the distance since the last remote report exceeds the specified
distance (in meters). A value of 0 disable this filter and triggers only on time.
But no less than ( ) seconds between reports
To prevent a fast-moving vehicle from reporting too frequently, a lower limit on the time between reports can
be specified.
Note: The Report every filters affect reports to both local (LAN, WLAN) and remote (WWAN) addresses.
Report Type
Specify the type of reports. Client can select the following report types:
―
TAIP, no ID
Selecting TAIP, no ID as report type client will get TAIP messages.
Example:>R4549542-0736643100035822;*7F<
―
TAIP, with ID
It is similar to above report type, but Along with this client will get Vehicle ID in Reports.
Example:>R4549542-0736643300000002;ID=ADAM12;*5E<
―
NMEA Sentences
Selecting NMEA Sentences as report type, client will get NMEA Sentence in reports.
Example:$GPGGA,202742.0,4529.7240,N,7339.8585,W,2,9,0.9,28,M,,,,*3E
$GPGLL,4529.7241,N,7339.8584,W,202645.0,A,D*7C
$GPRMC,153716.00,A,4529.72428,N,07339.86082,W,0.007,,180108,,,A*69
$GPVTG,,T,,M,0.004,N,0.008,K,A*2F
NMEA Sentence List
Select the NMEA Sentence List. Client can create a new NMEA Sentence list.
GNSS "sentences" are collected the from the internal GNSS receiver in the Vanguard Cellular Broadband
Router. These sentences are converted into the above formats and are provided to both local and remote
delivery services. Two TCP ports are available for clients to connect to and receive reports at the local or
remote reporting rate. Each report from the TCP ports is terminated with carriage-return/linefeed characters
(CRLF). Up to two local UDP Hosts and three remote UDP Hosts may be specified. Reports are sent as a
datagram with no terminating CRLF.
GPS Configuration Table
This section displays information for all clients present.
Edit
Click the Edit button to modify the existing settings for any client.
