Vanguard 3000 Multicarrier Cellular Data Modem & IP Router PN 134732-VG3000 Rev. D| Page 23
Figure 20: Cell Connection — Carrier
Carrier
Active Carrier
Select which carrier, Primary or Secondary, and credentials to use for carrier connection. Select Automatic to
have the modem choose a carrier based on conditions defined in the Automatic Carrier Switching section at
the bottom of the page.
Primary Carrier
Select the appropriate carrier with cellular protocol (GSM/CDMA) from this list that will serve as the primary
carrier. The Primary Carrier selected cannot be the same as the Secondary Carrier. GSM carriers require that a
proper SIM be installed.
Secondary Carrier
Select the appropriate carrier with cellular protocol (GSM/CDMA) from this list that will serve as the secondary
carrier. This selection cannot be the same as the Primary Carrier. GSM carriers require that a valid SIM be
installed.
Data Session Type
Select the cellular technology used. Options include 2G, 3G or Auto.
Auto Connect
Select Enable (the default and recommended setting), and the modem will automatically dial the connection
