8600 Series
Installation Instruction
39 of 40
CAL-ROYAL PRODUCTS, INC.
6605 Flotilla St. Commerce CA 90040
Tel: (323) 888-6601; Fax: (323) 888-6699
Email: [email protected]; Website: www.calroyal.com
Section # 14.0 - Additional Information
Floor Space Requirements for Wheel Chair Maneuvering
• The owner may request the activition device location; however, the press switch must be in
view of the door and not directly on the door or Fram. Please refer to ANSI 117.1 Safety Code
for further guidelines on switch requirements.
•
Activation switches shall be at minimum height of 34” and maximum height of 48” from finished floors.
• Individual who uses wheelchair need a minimum of 48” clearance to the door swing for doors in series.
• Door must move easily open and close (latch) without excessive force; weather stripping and threshold
must not interfere with door movement.
Factors Door Condition
Reveal
• For out swing (Push) doors, the reveal must be within the range of 0” to 14”. For in swing (Pull) doors, 0”
to 4” for special reveals is allowed - for all others consult factory.
External and Internal
and doorstop position, to increase the tension spring consult factory.
