8600 Series
Installation Instruction
13 of 40
CAL-ROYAL PRODUCTS, INC.
6605 Flotilla St. Commerce CA 90040
Tel: (323) 888-6601; Fax: (323) 888-6699
Email: [email protected]; Website: www.calroyal.com
5-1/4
(133mm)
Step 5.
Once the header back plate is in place, install the motor/gearbox and control board to the header back plate
Slide the nuts (supplied with the operator) to hold the motor/gear box and control board along the 2 parallel tracks on
the back plate.
Fasten the bolt to hold the motor/gear box and control board in place.
The motor/gearbox needs to be installed so that the center of the spindle is 5 ¼" ( 133mm) from the end plate.
