8600 Series
Installation Instruction
12 of 40
CAL-ROYAL PRODUCTS, INC.
6605 Flotilla St. Commerce CA 90040
Tel: (323) 888-6601; Fax: (323) 888-6699
Email: [email protected]; Website: www.calroyal.com
Step 3
.
Power Supply
Make sure all power is turned OFF
before handling the supply wires.
electrician and w ithin the guidelines
of the enforced local electrical codes.
Drill holes f or the high voltage wires
in backing plate.
Pull the power supply i nto the header
at the same time as t he header
assembly is positioned.
Step 4. Fixing Operator in Place
B
e sure t here i s proper support in
the wall to secure t he header at the
vertical jambs and behind t he
header a t intervals between t he
vertical jambs.
be required to compensate for any
gap between t he back o f base rail
and wall.
door frame, t hat access holes for
power supply cables are i n line, if
required
Secure the header box to the top of the door frame w ith the appropriate fasteners.
Holes can b e made anywhere i n header to secure. A ll holes MUST be drilled into substantial support
(studs, blocks, framing, etc.).
